Butter, What?! Butter, What?!

It really ties the room together.

November 15, 2026 · Pat Regan

We Had More Fun Than We Could Handle At Texas Linux Fest 2026

Brian and I had a lot of fun hosting a booth at Texas Linux Fest this year. We spilled out onto a second table, which definitely helped us have enough room for all our props. I gave away a lot of 3D-printed keychains, Brian gave away at least as many TXLF-themed coasters, and it was SO MUCH FUN being able to give away a 3D-printed NAS box to one lucky winner in person!

Last year, I wrote about how much trouble I had connecting each name, face, and conversation correctly in my head after meeting and talking to so many people in such a short span of time. I got to add one more layer to that problem this year. I talked to people who said they had talked to me last year, and I saw people I THOUGHT I had talked to last year! Sometimes I connected the dots right away, sometimes the gears turned much more slowly, sometimes I was just completely wrong.

Pat and Brian manning the Butter, What?! booth
Pat and Brian manning the Butter, What?! booth

It is an absolute blast to man a booth at a conference, have all sorts of interesting people stop by to talk, and NOT have anything to sell them. We brought an assortment of props representing the things we write about on the blogs in the Butter, What?! global media empire and the things we enjoy jabbering about every day in our Discord community.

The DIY NAS giveaway was awesome!

Giving something away in person is SO MUCH more fun than it is giving something away over the Internet. People would stop by regularly to see how their chances were going, and just like last year, a small crowd grew right as Brian was sending the notification email to the winner.

The winner did indeed pick up his prize, but he almost missed out! He was sitting in a talk and didn’t notice Brian’s email right away. We were minutes away from reaching out to the next potential winner when he finally showed up at our table. That would have been a disappointing way for the giveaway to end, so I was awfully glad we got to hand the NAS over to him in person!

Brian Moses, the 3D-Printed DIY NAS, and the 2026 Giveaway Winner!
Brian Moses, the 3D-Printed DIY NAS, and the 2026 Giveaway Winner!

Brian couldn’t afford to give away the twelve hard drives that would be needed to fill this year’s giveaway NAS. Last year, he left the case empty. This year, he filled it with 3D-printed dummy hard drives to show off the nifty spring-loaded rail mechanism.

Brian used makerunit’s awesome 12-bay NAS case from Printables this year. I find the case particularly interesting because it is segmented in such a way that it can be printed on my tiny 180-mm Bambu A1 Mini 3D printer.

The Topton N29 motherboard is interesting, too. It has an integrated Intel N150 CPU, 6 SATA ports, dual 10-gigabit Ethernet ports, and three M.2 NVMe slots. Brian added an M.2 adapter with 6 additional SATA ports to allow all twelve drive bays to be filled, and he pre-ran all the power and SATA cables. You can find the rest of the details in Brian’s full build and parts list.

I have been a fan of these low-power Intel CPUs for years. My own N100 server has just enough chooch to transcode three H.265 4K HDR Jellyfin streams simultaneously while only burning around 10 watts of power, and the N150 ought to be able to do a little better.

The keychain phone stands taught me a few things!

Running a 3D printer at an event that isn’t focused on makers is fun. There is a lot of overlap between Linux geeks and people who own 3D printers, but there are still tons of people who have very little exposure to 3D modeling and 3D printing. I enjoy giving away the things we print as SWAG, especially when some of the SWAG is being printed live at the booth.

Last year I printed simple USB adapter holders that let you carry one C-to-C cable and adapt it to micro, mini, full-size USB-A, or Lightning. I gave away a few more of those this year, but I wanted my new print to be more ambitious: small, easy to print, genuinely useful, and interesting to talk about. I landed on a keychain phone stand with a print-in-place hinge.

Print-in-place mechanisms are fun. A decade ago, most people I talked to were impressed that this sort of thing could be printed at all. At TXLF this year, only two people found the hinge interesting. Fewer than I expected, but enough to make this feature worth having!

Trudy's favorite mouse accidentally wound up at our booth!
Trudy's favorite mouse accidentally wound up at our booth!

There’s no shortage of similar keychain designs I could have downloaded from MakerWorld or Printables, but I wanted to deface the part with TXLF messaging and a Butter, What?! logo. Instead of trying to find one with an appropriate license, I designed the articulated phone stand using Kimi K3 and the Pi coding harness. I figured designing the stand with AI would be a good conversation starter for software developers, and that maybe a few people would be grumpy with me for using AI at all. It wound up being less interesting to talk about this aspect than I anticipated.

People’s actual phones caused me more trouble. I put a 12-mm slot in the stand, which is several millimeters wider than necessary for my Pixel 6A. I figured that would leave enough room for cases, and I didn’t make that number up–I checked the dimensions other phone stands were using! More than half the people who tried my stand had massive cases that didn’t fit.

The easy part is fixing it. The stand is a parametric OpenSCAD design, so I just have to change a 12 to a 14 or 15. The trouble is that I had already printed a bag full of them in various colors, and I wasn’t in a position to modify the design and print enough replacements on the fly. With the benefit of hindsight, I should have kept the two sets of slots at the same angle and made one of them about 3 mm wider, instead of using different angles to lean your phone back or keep it more upright.

I also goofed up the colors on the first print job of day two. The logos were supposed to be yellow, but I selected the same red filament as the rest of the part. These are still a perfectly good keychains, but not as nice as the others!

One person who picked up a free keychain showed off their 3D-printed ALDI-quarter substitute, and I immediately wished that I had incorporated an appropriately sized round end into my keychain! It wouldn’t have cost me anything, and it would have given you an additional reason to carry our keychain.

Once again, I missed all the talks!

I may not have left our table to attend any talks, but quite a few of the speakers came to me, and every single one of them was excited to tell me about the topic of their talk! Manning our own table was awesome, because we got to have nice chats with hundreds of people. The bummer is that it didn’t leave us with the time or energy to go see these enthusiastic people talk about their projects! I picked out a few talks I was hoping to hit before last year’s conference, but this year I knew going in that I wasn’t going to leave the table, so there was no point in pretending I had a schedule to plan around.

The talks are being uploaded to YouTube. Some of them aren’t there yet, and some may be missing. I did my best here to match up the people I spoke to with their talks.

Alex Shut gave a talk about how he built ProxUI to have a better web interface for Proxmox in his homelab. Alex is a cool guy! I remember chatting with him last year, and as soon as he saw me this year, he walked directly over to tell me about the awesome e-ink conference badge that he designed and built. I immediately asked him for the URL so I could add it to Butter, What?!’s brand-new aggregator. Alex didn’t even tell me that he was speaking at the conference. He was too busy showing off the gadget he made and answering my questions about it!

Sophia Solomon gave a talk titled How to Upgrade Your System Like a jRPG. The talk isn’t up yet on the TXLF YouTube Channel, but I sure hope it is soon. Sophia described this little pixel-art JRPG town, and I really want to see what it actually looks like! I am almost positive that I met Sophia at our booth last year, but I didn’t put that together until I was writing this blog.

I got to chat with Kory Heard about his 5BSD Project. I could summarize what is written on the tin, but instead I’m going to tell you how he explained it to us. He told us that he wanted to go back and fork UNIX, and he decided that the way to do that was to fork FreeBSD and sort of work his way back. You can watch his session at TXLF 2026 on YouTube.

I also met Eric “The IT Guy” Hendricks. He wound up asking me the same question that his From Bash to Burnout talk starts with: had I ever been laid off? I got to hear some of his experience before a third and fourth person joined us in the conversation at the booth, so I don’t think I got to do more than answer in the affirmative. This is a bummer, because I definitely empathize with him. It has been a long time, but when I was laid off it was entirely unexpected. I’m disappointed that I wasn’t able to show him that my understanding went deeper than a simple, “Yes!”

Those definitely aren’t all the speakers I ran into, and I am told there were lots of other good talks. The vast majority are in a playlist on YouTube!. I will for sure be queuing some of these up over the next week or so to see what I missed!

We missed the afterparty again, but we’re already planning for next year!

Brian and I have now missed the afterparty two years running. By the end of Saturday I was all talked out, my throat had that coughy feeling it gets after two days of hollerin’ at people, and neither of us could picture spending another few hours in a noisy bar.

So we ordered a pizza and ate it in the hotel’s cafe area. That is not a story anyone is going to put in a conference recap, and I am not going to pretend it was a wild time, but that was all we had left in us.

The good news is that our booth mostly works. Talking to 200 people in sixteen hours is so much fun, but it is also exhausting, so I don’t think there’s much room to squeeze in more effort during the conference. Most of the improvements we talked about making for next year are fairly small.

We could use better signage. We weren’t sure if we were going to get a second table, so I didn’t order banners or a branded tablecloth for “my” table. Brian thought the signs explaining things on his table could have been more informative, and it didn’t even occur to me to print some words for mine.

Informative signage can be a double-edged sword. If a sign answers too many questions, people might walk by assuming they have learned everything they need to know. Some of my favorite moments on the Create/Invent Podcast came from guests surprising us, so I am probably always going to favor leaving room for spontaneous conversations. There has to be a happy medium between a blank table and answering every question before anyone says hello!

Brian has wanted to improve the giveaway process for the past two years, and he already has a short list of things he wants to do better next year. I wonder if they would let us tie the DIY NAS giveaway into the closing remarks. Wouldn’t it be more fun to call the winner while everyone remaining at the conference is sitting in the same room?!

We have already started arguing about what else to do next year. I need to come up with something new to 3D print, and I will definitely bring the extra phone stands along. We have had two or three kids show up both years, and we were definitely unprepared for that. Next year I will be sure to bring a few fun things to hand out to them!

It would not surprise me if the best idea for next year is one that neither of us has thought of yet. What should we print? Would you rather see us give a talk than stand around jabbering?

Are we going to see you next year?!

If you stopped by our booth this year, thank you! Even if you just grabbed a keychain, said hi, and kept walking, you are the reason we haul the whole pile of props from Dallas to Austin. Texas Linux Fest is the one weekend a year where I get to stand behind a table and talk to a whole mess of people who are just as excited about this stuff as I am, and I have been counting down to the next one since Sunday night.

If you could not make it, or you stopped by and we did not get all the way through a conversation, join our Discord community. We have channels for 3D printing, homelabbing, and coding harnesses, along with a wide range of other geeky topics. Whether you attended or not, you should stop by, say hello, and let us know what you would like to see next year!

I am already looking forward to next September, and I want to know if you are going to be at Texas Linux Fest 2027. It is September 17 and 18, back in Austin, so you will have to be there to get in on the next giveaway. Brian is already thinking about which 3D-printed case to use for it.